Monthly Archives: February 2015

Wimpy Indecisive Fisherman Looses Prized Fly – by Jack Harford

Blue Bead Redneck Bugger

Blue Bead Redneck Bugger

One of my friends invited me to come over and fish the big lake behind his house the other day and it was my pleasure to take him up on that offer. We took off in our kayaks after an excellent burger on the grill dinner. It had rained some that day and was windy at times, but as we pushed off from the dock the water was calm and no rain in sight.

A hopper/dropper combination were the flies of choice this evening with a Giant House Fly on top and a Blue Glass Bead Black Redneck Wooly Bugger size 8 about 18” below. The fish were cooperative, but not overly so. Several decent bluegills and a few one pounder bass made for an enjoyable evening. All but one were caught on the bugger. Several little bluegills nipped at the house fly, but the #6 hook was a lot more that they could handle. I would like to show you the bugger that caught all the fish, but unfortunately it didn’t come home.

The sun was going down and there was one more bank to fish. This bank had a wall of railroad ties 3 or 4 feet high holding back the earth. A mass of stringy weeds littered the surface and the only spot to cast to was in between two rows of these weeds. A cast was thrown out and shortly after the flies hit the water, the house fly disappeared. As the hook was set, it felt like the flies were snagged on something, but then that something started to move, and then a little faster, and then back under the kayak, and then deep into the weeds.

At that point it seemed that the fish was lost, but she sat in the weeds only a few moments and made another run for it. It definitely did not feel like a bass. After a fight of about 10 minutes, something began to emerge to the surface. It was completely black, covered with a luminous shiny slime – big – bad – and ugly. As some of you may have guessed already, there was a big catfish on the end of the line. And when I saw her, I started asking myself questions like: Do I really want to bring that slimy mess into my nice kayak? How do I pick this gal up without getting one of those sharp spines rammed into my hand? And other nice questions like that.

While all these questions were circling in my mind, I had grabbed the leader and worked my way down to the tippet. Get the picture – Wimpy indecisive fisherman, holding a ten pound catfish by a four pound tippet, just at the surface of the water. That catfish just smiled, shook her head, snapped the tippet and lumbered off with my beautiful blue glass bead head black redneck wooly bugger.

I better get back to the bench and tie some more.

Blue Glass Bead Redneck Bugger
Hook: Mustad 9672 size 8 or any streamer hook
Thread: Red UTC 140
Tail: Black Marabou
Rib: Copper wire, or gold or silver
Body: Black Chenille
Hackle: black saddle hackle

I like to tie the hackle in the front after the chenille is wound to just behind the bead. Hackle the feather towards the rear and cinch it down with the copper wire. Do a few extra turns with the thread just behind the bead to get the redneck effect. I use red thread for 80% of my flies to give them a little extra attraction power.
We don’t catch fish, fish catch flies . . . . I try to tie flies that fish like to catch.

Jack Harford – Editor, Armchair Angler newsletter of for the Indianapolis Fly Casters

Leave a Comment

Filed under Uncategorized

Ray Charles Sow Bug

Time to put on your dark glasses and play some Ray Charles and tie up a Ray Charles Sow Bug!

Leave a Comment

Filed under Trout flies

Poppers and Divers – Kirk Dietrich

Kirk makes some beautiful poppers and divers. Check out his latest.

Decided to break out the Paasche airbrush after having my light colored Copic colored bugs fade. Figured to do some fresh “poppers” for the warmer weather that should be right around the corner. I’ve come to like Fire Tiger coloration as you might notice but played with some different tail/skirt configurations. Really like the fox fur.

P1220157-2

Some Comal floats tied on Mustad 34007, size #1 for bass and redfish.

P1220153-1

The other half of the floats tied on Gaelic Supreme hump shank hooks from Herter’s, size #4.

P2010191-3

Some Walt Holman simple divers I made from balsa plugs.

P2010196-4

Some of my divers made from cork bottle stoppers; this design has been working for me since I first started making it back in 1988.

Leave a Comment

Filed under Largemouth, Saltwater, Smallmouth

Crystal Popper – Marcelo Morales

Foam poppers: chartreuse foam heads.
Thread: 3-0, white. Monofilament thread.
Hook: Long shank Daiichi Sea hooks. 2/0 to 3.
Feathers: American Hackle cape, badger color. Marabou chartreuse.
Cover: pearled Mylar Tube.
Epoxy: Devcon, 5 minute dry or similar.
Eyes: holographic.
Others: cianoacrilate enamel

Leave a Comment

Filed under Uncategorized

Zudbubbler Frog

Pat Cohen shows you how to tie a cool frog pattern using Zudbubbler Popper Bodies combined with Cohen’s Creature Frog Legs. Zudbubbler Popper Bodies were designed by Matt Zudweg of BoneYard Fly Gear.

Leave a Comment

Filed under Poppers

Klinkhamer

Hans Van Klinken, a Dutch fly tyer designed the Klinkhamer Special 25 years ago. Tim Flagler shows you how to tie one up!

Leave a Comment

Filed under Trout flies, Uncategorized

Muskie Tackle 101

Tight Lines Fly Shop is often asked what is needed for Fly Fishing for Muskie. Tight Lines Guide Nate Sipple explains all the basic tackle to help get you started.

1 Comment

Filed under Muskie

Troubled Child by Joe de Leronde

Troubled Child

(named after my oldest daughter whom is…can be….umm…a bit of a wild kid…hah).

This, I suppose, at its core is a Hare’s Ear….but with so many different materials, it is ‘out there’ for sure. This pattern has great movement from the legs, enough natural buggy-ness to catch that ‘edge’ but enough flash in the reds/oranges as well as in the dubbing itself to work as an attractor pattern as well. This one, is great for aggressive takes and while I use it under an indicator, the strikes are STRIKES!…there is typically no ‘sipping’ with Troubled Child.

Thread: black
Hook: standard nymph, size 8 (steelhead)
Tail: 2 hot orange barred silly legs
Abdomen: black hare’s ear dubbing mixed with a pinch of black ice dub ribbed with a single strand of red flash-a-bou. Ratio of the abdomen mix is about 5-6:1 natural to ice (more natural than dub)
Thorax and collar: black hare’s ear dubbing mixed with black ice dub. Ratio here is closer to 3-4:1 natural to ice. Hot orange barred silly legs; 4 per side.
Wing Case: this is a bit more involved than ‘just’ pulling a single material wing case. The under-wing is a strip of red thin skin with about 7-10 strands of bright red flash-a-bou as over-wing. I then put a drop or so of UV cured epoxy to create the ‘candy-coat’.
Head: Hot orange bead…typically 3/32. 2 hot orange barred silly legs serve as antennae.

General instructions: This is a fun pattern to tie and look at but it does take a bit of skill to work through as well as it uses a range of materials.

OLYMPUS DIGITAL CAMERA

I tie on the front antennae before putting on the bead making sure to tie the antennae pretty tightly so the bead can be pushed over the tie-in. After the bead, I like to wrap about 7-10 turns of medium lead (poor man’s tungsten) right behind the bead…basically, the length of what the thorax will be. This helps to hold the bead as well as build up the thorax of the fly. When I tie the tail (also silly legs), I try to make sure there is a good split between the 2 as opposed ‘just’ being straight.

As for tying with the dubbing, I pretty much always use a dubbing tool except for right behind the bead. With that, right after tying down the wing-case, I like to finish my nymphs with a tiny pinch of the same dubbing as the thorax for a collar right behind the bead. I like the look and it also adds to the ‘buggy-ness’ of the fly, I think. I also like to tie the thorax pretty bulky and after finishing/tying off the fly, I use my bobbin to pluck out legs and basically ‘fluff up’ the bug.

For the thorax legs….for me this is always a bit of a challenge to get right. I like…strive to have both separation between the front pair and back pair…but also have the legs flay out from each other (I’m picky that way….hah). I have tried different techniques for this and can find plusses and minuses for every way I have tried. Basically, anything that gets the separation…is the key.

For the wing case…..the thin skin/flash-a-bou combo with the UV finish….is deadly looking as well as producing a very durable fly. With the UV cure…there is a candy-like quality that catches light and probably works as a good attractant.

I like this pattern in the spring when the runs are on. Best fished, for me, under a suspension system (indicator). Ironically, this is a specific target fly as I can-not remember any ‘by-catch’ of any other species (like pesky smallmouth bass) but the steelhead I am targeting.

St Clair Steel April 26 13

Leave a Comment

Filed under Steelhead

Mini D&D (Drunk & Disorderly) Streamer by Tommy Lynch

(NOTE: Background music is saying Funk, not the other word.)

Tommy Lynch’s Drunk & Disorderly has become huge Brown Trout crack. With a few twists & turns, the “Mini D” has proven itself to be an awesome streamer for winter STEELHEAD. One of the most exciting ways to hunt Steel thru the frozen months we’ve ever seen. Learn to tie the the master himself, Tommy Lynch, aka The Fish Whisperer.

In this video Tommy covers the “mini” version of the Drunk & Disorderly, however the fundamental design principals and materials are the same for the D&D (double) and Triple-D. Material list for the Mini-D included in the video. Check out our other videos for instructions on the double, or just ask the shop for pattern sheets.

Looking for hard to find materials to tie Tommy’s Mini-D? Give Schultz Outfitters a call (734-544-1761). If you’re ever in the Ypsilanti, MI area be sure to stop by and check out our original Bar Flies tying event. Always the first. Still the best. If you can’t make it, be on the lookout for more tying videos shortly.

2 Comments

Filed under Streamers

Cecil’s Hellboy

Cecil Guidry

Cecil Guidry

I spoke with Cecil Guidry at the Indiana Fly Fishing Expo last month and he was tying a cool foam pattern. This is Cecil’s Hellboy and it isn’t your grandpa’s foam fly.

Cecil demonstrates how to tie up his Hellboy fly. This is a fantastic topwater pattern for smallmouth & largemouth bass, tied in larger sizes and it is a good Northern Pike fly. Best of all, it is also a great panfish fly for LARGE slabs. With basically three materials there are an endless amount of color and material variations you can use to adapt this fly to your favorite water.

Visit Cecil at his website, Warm Water Chronicles.

3 Comments

Filed under Foam, Largemouth, Pike, Smallmouth